Safety Data Sheets

Overview

Avient has transitioned our Material Safety Data Sheets (MSDSs) to Safety Data Sheets (SDSs) for our manufactured products to meet the requirements of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), and CLP classification in Europe. You may see us use both terms, MSDS and SDS, as GHS becomes more familiar in all of our global market. For more information on this initiative, please see our FAQs.

Note: SDS access methods vary by region - please read the instructions for your region carefully.

NORTH AMERICA (Goods manufactured by Avient): Use the search boxes on the current page to use the online search for SDS for products manufactured by Avient.

ASIA/PACIFIC: SDS for the Asia Pacific region can be obtained by contacting the appropriate regional office. For a list of regional offices, please click here.

EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office. For a list of regional offices, please click here.


Downloads
FO20036594 50100 FABRI-TAK
FO20036595 50220 HOT TAK ADHESIVE
FO20036597 Geon(TM) DK130-80 Black Geo Grid Coating
FO20036598 STAN-TONE HCC-35898 STRLNG SILVR 78
FO20036599 STAN-TONE HCC- LT PEWTER 90
FO20036600 STAN-TONE HCC- GRAY 7012 V2
FO20036606 STAN-TONE HCC- EGGPLANT 2623
FO20036609 STAN-TONE HCC-35896 SW CEDAR
FO20036610 STAN-TONE HCC- SW TAN
FO20036611 STAN-TONE HCC-35870 MAP #101 RAIN
FO20036612 STAN-TONE HCC-35872 MAP #103 CBLSTN
FO20036613 STAN-TONE HCC-35871 MAP #102 MINT
FO20036614 STAN-TONE EPX-35902 EPOXY GREY
FO20036623 Geon(TM) DB1587A ESTEE TEAL
FO20036624 Geon(TM) MB2979 Purple Bowling Ball
FO20036625 STAN-TONE VCP-35892 RED 0029472
FO20036629 Geon(TM) DB5213 CLEAR SOFT 3727
FO20036630 Geon(TM) DB1587A MIRAGE BROWN
FO20036631 Geon(TM) FP101-70 Closure Plastisol
FO20036632 Geon(TM) V4340-81 Gray Hot Dip NP
FO20036634 Geon(TM) SK131-80 Black Low Cost NP
FO20036635 Geon(TM) SK132-80 Black Retail Mat Vinyl NP
FO20036638 FLASH-TAK SPRAY ADHESIVE 600ML
FO20036640 HOT-TAK SPRAY ADHESIVE 600ML
FO20036643 Geon(TM) DB5212 Neutral GP117-56 Non Phtha

Search Tips

  1. You may search by either Product Code or Product Name but not both in the same search.
  2. You may enter COMPLETE or PARTIAL product code or name information. (The more complete the information, the more accurate the search result - e.g. a search that only includes the number "8700" or the word "RED" will yield very large results sets).
  3. In a Product Name search, the characters MUST INCLUDE ACCURATE SPACING AND HYPHENATION as shown on Avient documentation.
  4. The search is NOT CASE SENSITIVE.
  5. Products that are no longer active have the last revised date.

Search Definitions

The Product Code (a.k.a. Material or Material Number) has either 12 or 14 characters. Examples of product codes include CC10188090WE, MP10000B297560, VC1000951760. 

To search using the product code please remove the last two characters from the code for your search. These last two characters are the package code, which is not needed when searching for a product. For example CC10188090, MP10000B2975, VC10009517

Avient Product Code (Material or Material Number) may be found on any of the following:

  • Sales Order Confirmation - under "Material Header"
  • Product Quotation - labeled as "Avient Material" Invoice - under "Material Header"
  • Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1)
  • Packing List - under "Material Number Header"
  • Certificate of Analysis (COA) - labeled as "Material"

TIP: If no results are obtained using the full product code or product name, try entering only a few of the characters and searching again.

Product Name (a.k.a. Description or Material Description) is the product description and may or may not be included the product's brand or other trademarks.

Examples of Product name are:

  • GEON W9300 NAT 0000
  • 10870PC BRIGHT YELLOW
  • STAN-TONE DB-15597 HI LITE BLUE
  • PP FR 8-6 LMS-1000

TIP: If no results are obtained when including the "brand" in the search field, remove it and search again.


Overview

Avient has transitioned our Material Safety Data Sheets (MSDSs) to Safety Data Sheets (SDSs) for our manufactured products to meet the requirements of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), and CLP classification in Europe. You may see us use both terms, MSDS and SDS, as GHS becomes more familiar in all of our global market. For more information on this initiative, please see our FAQs.

Note: SDS access methods vary by region - please read the instructions for your region carefully.

NORTH AMERICA (Goods manufactured by Avient): Use the search boxes on the current page to use the online search for SDS for products manufactured by Avient.

ASIA/PACIFIC: SDS for the Asia Pacific region can be obtained by contacting the appropriate regional office. For a list of regional offices, please click here.

EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office. For a list of regional offices, please click here.